跳到主要內容區塊

台大化工系網站

余柏毅 副教授 / Bor-Yih Yu Associate Professor

程序系統工程研究室 Process Systems Engineering Lab 一館 各類化工模擬技術、製程強化、生命週期分析 各類化工模擬技術、製程強化、生命週期分析 Chemical Engineering Simulation TechnologiesProcess IntensificationLife Cycle Assessment (02)3366-5641 BLDG. I (02)3366-1931 boryihyu@ntu.edu.tw 309 余柏毅 Bor-Yih Yu 化工一館 CheE BLDG.I 副教授 Associate Professor 302
    • 學經歷
      • 台灣大學 化工學士,2011
      • 台灣大學 化工博士,2017
      • 長庚大學 化工與材料工程系 助理教授 2019/02–2022/01
      • 長庚大學 綠色科技研究中心 合聘助理研究員 2020/09–2022/01
      • 長庚大學 人工智慧研究中心 國際技術合作組 組長 2021/04–2022/01
      • 國立台灣科技大學 化工系 助理教授 2022/02–2022/07
      • 國立台灣大學 化工系 助理教授 2022/08–2024/07
      • 韓國高麗大學 化工與生物分子工程系 客座教師 2023/12–2024/01、2024/12–2025/01、2025/12–2026/01
      • 國科會淨零方案推動小組 領域專家 2025/04–今
      • Process Safety and Environmental Protection (PSEP) 期刊 Subject Editor
        2024/09–2025/01; Associate Editor 2025/02–今
      • Journal of Chinese Institute of Engineers (JCIE) 期刊 Associate Editor 2024/11–今
      • Cambridge Prism: Carbon Technologies 期刊 Editor 2025/01–今
      • Separation & Purification Technology (SPT) 期刊 Early Career Board Member 2025/02–今
      • ISO 14064-1: 2018 組織層級溫室氣體主任查證員

     

    • 研究主題

                   本團隊之研究主軸,為應用製程模擬技術(如:廠級質量與能量分析、單元級別模擬、數據模擬…等),

                    以解決各類化工問題,以期能在產業、經濟、環境等面向提供助益。

                    目前幾個著重的主題包含:

                    1. 生物質轉換製程

                    2. 二氧化碳捕捉與再利用製程

                    3. 資源循環與廢棄物回收、轉化、升級應用

                    4. 化工製程強化

                    5. 生命週期分析方法與應用

                    6. 數據建模於跨領域產業應用

                    

                    除學術研究外,本研究團隊亦與企業合作密切,歡迎各界先進洽談合作。

    1. 2023年台灣化工學會石延平論文獎(題目: 「Novel control strategy for intensified glycerol carbonate (GC) manufacturing process」)。
    2. 指導李騏睿同學榮獲「2024年熱力學暨程序系統工程研討會」最佳口頭報告獎。
    3. 指導曾安紘同學榮獲「2024年熱力學暨程序系統工程研討會」最佳口頭報告獎。
    4. 指導鄭崢同學榮獲「2024年熱力學暨程序系統工程研討會」最佳海報獎。
    5. 指導林書亞同學榮獲「台灣化工學會第70周年年會」海報競賽佳作獎。
    6. 指導郭景泰、游定諭、賴正鎧三位同學(台灣大學化工系)榮獲「台灣化工學會大專程序設計競賽」佳作獎(2023)。
    7. 指導林孟暐同學榮獲「台大化工系碩博士畢業論文展論文比賽」金獎。
    8. 受邀擔任「台灣化工學會大專程序設計競賽」評審委員(2022-今)。
    9. 受邀擔任台塑公司「化工製程設計與單元模擬研習課程」講師(2019-今)。
    10. 受邀擔任「程序系統工程實務訓練課程」講師(2019-20)。
    11. 指導陳聖哲同學(長庚大學化材系)榮獲「2021年熱力學暨程序系統工程研討會」最佳研究報告獎。
    12. 指導陳聖哲、黃梓桓、夏遠斌三位同學(長庚大學化材系)獲得「台灣化工學會大專程序設計競賽」佳作獎(2021)。
    13. 指導吳佩蓁、陳柏儒、周鈺嵐三位同學(長庚大學化材系)獲得「台灣化工學會大專程序設計競賽」佳作獎(2019)。

     

    國際學術演講

    1. 國際單位專場演講: 英國貝爾法斯特女王大學(2025/09)、法國里昂催化與環境研究所(2025/09)、法國洛林大學(2025/04)、韓國KAIST(2025/01)、韓國高麗大學(2025/01)、日本神戶大學先進薄膜技術研究中心(2024/09)、香港城市大學(2024/07)、韓國漢陽大學(2025/01)、韓國西江大學(2024/01)、韓國KIST研究中心(2024/01)、韓國高麗大學(2023/12)。
    2. 國際研討會專場演講: 2025 Taiwan Research Day (2025/09,國科會於荷蘭TU Delft主辦)、2025 Taiwan Research Day (2025/04,國科會於比利時荷魯汶大學主辦)、台法工業減碳研討會(2024/11,法國巴黎)、日本化工學會第55屆秋季年會(2024/09,日本北海道)、Taiwan-Japan Symposium on Reaction Control (2023/07,台灣新竹)、PSE Asia 2022 (2022/12,印度清奈)。
  • 近年著作:

    1. J.-J. Hsu, Z.-C. Su, T.-W. Huang, B.-Y. Yu*, J.-Y. Lee*. “Unravelling the potential of glycerol etherification through the tert-butanol pathway: Rigorous process design, techno-economic evaluation, and life cycle assessment”. Journal of Industrial Engineering Chemistry, 2025 (In press, published online on 15.09.2025).
    2. P. Nimmanterdwong, A. Srifa, T. Prechthai, N. Tuntiwiwattanapun, R. Piemjaiswang, B.-Y. Yu, P. Pornaroontham, T. Sema, B. Chalermsinsuwan, P. Piumsomboon. “An intelligent plant-wide decision-support framework for waste valorization: Optimizing hydrochar production and energy recovery”. Fuel Processing Technology, 2025, 277, 108320.
    3. V. Valasara, B. Ahn, S. Goel, S. M. Han, N. Woo, B.-Y. Yu*, W. Won*. “Process design and integrative analysis for the co-production of bioplastic monomer and biochemicals from lignocellulosic biomass.” ACS Sustainable Chemistry & Engineering, 2025, 13(31), 12767-12781.
    4. Y.-S. Chen, H.-H. Chiu, H.-S. Jao, Y.-Q. Kiew, B.-Y. Yu*. “Progress in modeling of Carbon Capture Technologies.” Cambridge Prism: Carbon Technologies, 2025, 1, e5.
    5. T.-W. Huang, B.-Y. Yu*. “Technological Assessment of Glycerol Carbonate (GC) Synthesis via Direct Conversion of Carbon Dioxide: An Examination of Process Design, Techno-economic Analysis, Life Cycle Assessment, and Safety Evaluation”. Process Safety and Environmental Protection, 2025, 104785.
    6. H.-C. Hua, M.-W. Lin, Z.-C. Su, I.-L. Chien, B.-Y. Yu*. “Unraveling the Potential of Chemical Recycling for Poly (methyl methacrylate) through Pyrolysis: Rigorous Modeling, Economic, and Environmental Evaluation.” Process Safety and Environmental Protection, 2025, 107258.
    7. V. Valasara, B. Ahn, J. Liu, B.-Y. Yu*, S. M. Han*, W. Won*. “Coproduction of drop-in biofuels and biodegradable plastic monomers: process design and integrative analyses.” ACS Sustainable Chemistry & Engineering, 2025, 13, 19, 6992-7004.
    8. H. Min, C. Kim, S.-Y. Lin, J. Choi, B.-Y. Yu*, J. H. Moon*. "Co-Enriched High Entropy Oxides for Efficient Continuous Electrochemical Methane Conversion: Catalytic Performance and Sustainability Insights". Advanced Materials, 2025, 2418767.
    9. L.-J. Jhuang, C.-J. Yang, B.-Y. Yu*. “Exploration of Alternative Reactor Configurations for the Fischer-Tropsch (FT) Reaction via Direct Hydrogenation of Carbon Dioxide.” Journal of the Taiwan Institute of Chemical Engineers, 2025, 169, 105989.
    10. P.-J. Wu, H.-H. Chiu, Z.-C. Su, S.-T. Lin, B.-Y. Yu*. “Safety consideration in CO2 Conversion: Production of Glycerol Carbonate via an Indirect Pathway.” Journal of Industrial and Engineering Chemistry, 2025, 147, 744-754.
    11. Y.-S. Chen, W. Won, B.-Y. Yu*. “Unraveling a novel biphasic CO2 capture process through rigorous modeling.” Separation and Purification Technology, 2025, 356, 129966.
    12. S.-F. Chang, H.-H. Chiu, H.-S. Jao, J. Shang*, Y.-J. Lin*, B.-Y. Yu*. “Comprehensive Evaluation of Various CO2 capture Technologies through Rigorous Simulation: Economic, Equipment Footprint, and Environmental Analysis.” Carbon Capture Science & Technology, 2025, 100342.
    13. M.-T. Lee, H.-H. Chiu*, B.-Y. Yu*. “Exploration of environmentally friendly processes for converting CO2 into propanol through direct hydrogenation.” Journal of Industrial Engineering Chemistry, 2025, 143, 271-282.
    14. T.-Y. Yu, C.-T. Kuo, C.-K. Lai, W. Won*, B.-Y. Yu*. “Unraveling the Alternative Process Configurations for More Environmentally Friendly Maleic Anhydride Production.” Process Safety and Environmental Protection, 2024, 191, 2385-2401.
    15. A.-H. Tseng, B.-Y. Yu*. “Evaluation of two acrylic acid production processes from renewable crude glycerol: Rigorous process design, techno-economic evaluation, and life cycle assessment.” Process Safety and Environmental Protection, 2024, 191, 983-994.
    16. J.-X. Lin, W.-J. Wang, B.-Y. Yu, C. W. Ong, C.-L. Chen. “Intensification of the CO2-capturing methanol steam reforming process: A comprehensive analysis of energy, economic and environmental impacts.” Separation and Purification Technology, 2024, 127612.
    17. H.-H. Chiu, B.-Y. Yu*. “Synthesis of Green Light Olefins from Direct Hydrogenation of CO2. Part I: Techno-economic, decarbonization, and sustainability analyses based on rigorous simulation.” Journal of the Taiwan Institute of Chemical Engineers, 2024, 156, 105340.
    18. H.-H. Chiu, B.-Y. Yu*. “Synthesis of Green Light Olefins from Direct Hydrogenation of CO2. Part II: Detailed Process Design and Optimization.” Journal of the Taiwan Institute of Chemical Engineers, 2024, 155, 105827.
    19. P.-J. Wu, C.-C. Hsu, B.-Y. Yu*, S.-T. Lin. “Rigorous Simulation and comprehensive analysis for the novel glycerol carbonate (GC) production process via indirect conversion of CO2.” Fuel, 2024, 357, 129831.
    20. S.-Y. Huang, W.-E. Huang, B.-Y. Yu*. “Rigorous Design, Techno-Economic and Environmental Analysis of Two Catalytic Transfer Hydrogenation (CTH) Processes to Produce Bio-based 2-Methylfuran (2-MF).” Process Safety and Environmental Protection, 2024, 181, 429-441.
    21. S.-J. Shen, A.-H. Tseng, C.-C, Shi, B.-Y. Yu*. “Development of the Cumene Oxidation Process: Rigorous Design, Optimization and Control.” Chemical Engineering Research and Design, 2023, 200, 602-614.
    22. T.-H. Huang, Y.-S. Chen, B.-Y. Yu*. “Techno-economic, Environmental, and Exergetic evaluation of a novel Isopropyl N-phenylcarbamate Production Process through Non-reductive Conversion of CO2.” Process Safety and Environmental Protection, 2023, 179, 124-136.
    23. Z.-Y. Yang, B.-Y. Yu*, I.-L. Chien. “An environmentally benign, energy intensified single-column side stream extractive distillation (SC-SSED) process for Acetone/n-heptane separation.” Journal of the Taiwan Institute of Chemical Engineers, 2023, 149, 105018.
    24. H.-H. Chiou, C.-J. Lee, B.-S. Wen, J.-X. Lin, C.-L. Chen, B.-Y. Yu*. “Evaluation of alternative processes of methanol production from CO2: Design, optimization, control, techno-economic, and environmental analysis.” Fuel, 2023, 343, 127856.
    25. A.-H. Tseng, B.-Y. Yu*. “Novel control strategy for intensified glycerol carbonate (GC) manufacturing process.” Journal of the Taiwan Institute of Chemical Engineers, 2023, 147, 104908.
    26. Y.-W. Chiao, W. Liao, P. A. Krisbiantoro, B.-Y. Yu*, K. C.-W. Wu*. “Waste-battery-derived multifunctional zinc catalysts for glycolysis and decolorization of polyethylene terephthalate.” Applies Catalysis B: Environmental, 2023, 325, 122302.
    27. B.-Y. Yu*, I.-L. Chien. “Novel temperature-control strategy for single column side-stream extractive distillation process with intermediate-boiling entrainer.” Separation and Purification Technology, 2023, 310, 123163.
    28. Y.-P. Shia, B.-Y. Yu*. “Development of a rigorous and generalized model on the hydrothermal liquefaction (HTL) process for bio-oil production.” Process Safety and Environmental Protection, 2023, 171, 541-554.
    29. M.-T. Lee, B.-Y. Yu*. “Evaluation on the intensified hydropropyl acrylate (HPA) production processes: Rigorous design, optimization, techno-economic and environmental analysis, and control.” Process Safety and Environmental Protection, 2022, 167, 671-685.
    30. Z. Uddin, B.-Y. Yu*, H.-Y. Lee*. “Evaluation of alternative processes of CO2 methanation: Design, optimization, control, techno-economic and environmental analysis.” Journal of CO2 Utilization, 2022, 60, 101974.
    31. B.-Y. Yu*, T.-Y. Tseng, Z.-Y. Yang, S.-J. Shen. “Evaluation on the Solketal Production Processes: Rigorous Design, Optimization, Environmental Analysis, and Control.” Process Safety and Environmental Protection, 2022, 157, 140-155.
    32. C.-T. Lee, C.-C. Tsai, P.-J. Wu, B.-Y. Yu*, S.-T. Lin*. “Screening of CO2 utilization routes from process simulation: Design, optimization, environmental and techno-economic analysis.” Journal of CO2 Utilization, 2021, 53, 101722.
    33. S.-J. Chen, B.-Y. Yu*. “Rigorous simulation and techno-economic evaluation on the hybrid membrane/cryogenic distillation processes for air separation.” Journal of the Taiwan Institute of Chemical Engineers, 2021, 127, 56-68.
    34. B.-Y. Yu*, J.-W. Ciou, P.-J. Wu, G.-B. Wang. “Conceptual design, optimization and carbon emission analysis for the Acrylonitrile/Acetonitrile/Water separation process.” Journal of the Taiwan Institute of Chemical Engineers, 2021, 122, 32-39.
    35. B.-Y. Yu*. “Development of two plant-wide glycerol carbonate production processes: Design, optimization and environmental analysis.” Journal of the Taiwan Institute of Chemical Engineers, 2020, 117, 19-25.
    36. Y.-C. Yu, T.-Y. Wang, L.-S. Chang, P.-J. Wu, B.-Y. Yu*, W.-Y. Yu*. “Conceptual design, environmental, and economic evaluation of direct copolymerization process of carbon dioxide and 1,4-butanediol.” Journal of the Taiwan Institute of Chemical Engineers, 2020, 116, 36-42.
    37. B.-Y. Yu*, P.-J. Wu, C.-C. Tsai, S.-T. Lin*. “Evaluating the Direct CO2 to Diethyl Carbonate (DEC) Process: Rigorous Simulation, Techno-Economical and Environmental Evaluation.” Journal of CO2 Utilization, 2020, 41, 102154.
    38. B.-Y. Yu*, C.-C. Tsai. “Rigorous simulation and techno-economic analysis of a bio-jet-fuel intermediate production process with various integration strategies.” Chemical Engineering Research and Design, 2020, 159, 47-65.

    近年研究計畫:

    1. 「木質素由水熱液化與水熱碳化進行高值化之整合程序開發」,國家科學及技術委員會,2025/08-2027/07。(114-2221-E-002 -199 -MY,主持人,NTD 2,398,000)
    2. 「次世代孔洞材料探捕捉與再利用技術: 工業化的瓶頸與突破(1/2)」,國家科學及技術委員會,2025/07-2026/06。(114-2218-E-002 -019,共同主持人,NTD 9,100,000)
    3. 「綠色工程跨領域微學程:國立臺灣大學產學合作培育計畫」,教育部補助綠色工程產學共育實習微學程先導計畫,2025/03-2027/02。(共同主持人)
    4. 「寧波廠PVC乳化粉重合槽注加優化研究」,台灣塑膠股份有限公司,2025/03-2026/02。(主持人,NTD 1,300,000)
    5. 「廠級模擬技術於化工產業之應用(II)」,台大高教深耕計畫-核心群研究計畫,2024/01-2024/12。(主持人,NTD 790,000)
    6. 「二氧化碳烷烯烴化與甲醇化之程序模擬評估」,財團法人工業技術研究院,2025/01-2025/07。(共同主持人,NTD 2,600,000)
    7. 「大林廠ROCT丙烯精餾塔V-3306動態模擬分析計畫」,中油公司大林煉油廠,2024/12-2025/2。(主持人,NTD 149,000)
    8. 「臺德(DE)國合計畫-綠氫在工業關鍵領域的去碳化及去化石化應用」,國家科學及技術委員會,2024/10-2026/09。(113-2923-E-006 -011、114-2218-E-002 -019,共同主持人,NTD 962,574)
    9. 「雙子星塔(V-3306)之穩態優化分析」,中油公司大林煉油廠,2024/08-2024/10。(主持人,NTD 149,000)
    10. 「多種廢棄塑膠之裂解回收製程開發以及策略規劃研究」,國家科學及技術委員會,2024/08-2025/07。(113-2221-E-002 -021,主持人,NTD 1,000,000)
    11. 「電弧爐煉鋼熔落期精煉程序模型開發」,中國鋼鐵股份有限公司,2024/06-2025/05。(主持人,NTD 950,000)
    12. 「可移動式補碳製程之材料研製」,滙聚智能販賣機股份有限公司,2024/05-2024/10。(主持人,NTD 345,000)
    13. 「SMR尾氣分離二氧化碳程序模擬」,中油公司綠能研究所,2024/04-2024/06。(主持人,NTD 149,000)
    14. 「廠級模擬技術於化工產業之應用(I)」,台大高教深耕計畫-核心群研究計畫,2024/01-2024/12。(主持人,NTD 900,000)
    15. 「二氧化碳甲烷化程序整合與填充床反應器之開發(II)」,財團法人工業技術研究院,2024/04-2024/11。(共同主持人,NTD 2,200,000)
    16. 「整合薄膜吸附/分離與電/化學觸媒轉化之前瞻碳捕獲與再利用技術開發」,國家科學及技術委員會,2023/08-2025/07。(112-2218-E-002 -051、113-2218-E-002 -027,共同主持人,NTD 9,000,000)
    17. 「麥寮正丁醇廠醛化反應器優化模擬」,台灣塑膠工業股份有限公司,2023/03-2024/02。(主持人,NTD 1,207,500)
    18. 「二氧化碳甲烷化程序整合與填充床反應器之開發(I)」,財團法人工業技術研究院,2023/04-2023/11。(共同主持人,NTD 2,600,000)
    19. 「二氧化碳生產碳酸甘油酯之新穎整廠製程開發」,國家科學及技術委員會,2022/08-2024/07。 (MOST 111-2221-E-002-200-MY2,主持人,NTD 1,706,000)
    20. 「纖維乳酸生產乳酸乙酯開發計畫」,國家科學及技術委員會(產學合作研究計畫),2022/06-2023/05。(MOST 111-2622-E-002-024,共同主持人,NTD 2,200,000)
    21. 「PBD批次乳化聚合反應理論模型模擬與製程優化評估」,台灣化學纖維股份有限公司,2020/04–2021/09。(共同主持人,NTD 1,800,800)
    22. 「二氧化碳烷烯烴化程序整合與填充床反應器之開發」,財團法人工業技術研究院,2022/04-2022/11。(共同主持人,NTD 2,210,000)
    23. 「台麗朗部丙烯酸聚合反應之理論與數據建模研究」,台灣塑膠工業股份有限公司,2021/07–2020/12。(主持人,NTD 600,000)
    24. 「化品部ECH廠反應區段數據建模研究」,台灣塑膠工業股份有限公司,2021/07–2021/10。(主持人,NTD 300,000)
    25. 「化品部MMA廠純化區段嚴密理論模擬研究」,台灣塑膠工業股份有限公司,2021/06–2021/12。(主持人,NTD 750,000)
    26. 「氣固反應與單元操作整合模擬」,財團法人工業技術研究院,2021/04-2021/11。(共同主持人,NTD 4,000,000)
    27. 「化品部ECH廠反應區段嚴密理論與模擬研究」,台灣塑膠工業股份有限公司,2020/09–2020/11。(主持人,NTD 500,000)
    28. 「化品部C4廠MTBE反應蒸餾製程最佳化模擬分析」,台灣塑膠工業股份有限公司,2020/07–2020/11。(共同主持人,NTD 500,000)
    29. 「合成酚廠丙酮塔液鹼添加預測模組」,台灣化學纖維股份有限公司,2020/04–2021/09。(主持人,NTD 4,249,640)
    30. 「製程技術研發實驗室之第二期模擬技術開發」,台灣塑膠工業股份有限公司,2020/04–2023/03。(共同主持人,NTD 5,000,000)
    31. 「台麗朗部 AE 廠 R-501 反應器穩態設計與動態模擬分析」,台灣塑膠工業股份有限公司,2020/04–2021/04。(共同主持人,NTD 1,300,000,包含於前項)
    32. 「生物質液化產製生質航空燃油製程之嚴密模擬與資料驅動模擬研究」,科技部,2019/08-2022/07。(主持人,NTD 2,384,000,MOST 108-2218-E-182-009-MY3)
    33. 「台麗朗部AE廠R401反應器穩態設計與動態模擬分析」,台灣塑膠工業股份有限公司,2019/07-2019/12。(共同主持人,NTD 700,000)
    34. 「甲苯溶劑SAN製程之動態模擬研究」,台灣化學纖維股份有限公司,2018/11-2019/10。(共同主持人,NTD 950,000)